FS 1710-12 RS Industrial Air Shocks Firestone W01-358-7727 For Continental Industry Equipment
FS 1710-12 RS Cross OEM:
GUOMAT NO.:1F7727
ContiTECH FS 1710-12 RS
Continental FS 1710-12 RS
ContiTECH FS1710-12 RS
Continental FS1710-12 RS
Firestone W01-358-7727
Firestone W01 358 7727
Firestone W013587727
Firestone W01-358-1026
Firestone W01 358 1026
Firestone W013581026
FS 1710-12 RS Industrial Single Convoluted Air Spring Specifications
| Product Specifications |
| Type: | 126 |
| Aluminum clamping ring: | 24 pcs of 3/8 bolts (tightening torque 40Nm) |
| Bolt diameter Ø: | 482 mm |
| Board diameter: | 517 mm |
| Max diameter (OD) at 7 bar: | 569 mm |
| Min height: | 51 mm |
| Max height: | 177 mm |
| Stroke: | 126 mm |
| Max force: | 150.66 kN at a height of 60 mm |
❶Nut / Blind Nut
The Long Of The Nut:38 mm
Top Cover Plate Screw number: 24 pcs
Bottom Cover Plate Screw number : 24 pcs
Top Cover Plate Screw (Nut) Tooth : 3/8
Screw Center Distance of Top Cover Plate : 482 mm
Bottom Cover Plate Screw (Nut) Tooth : 3/8
Screw Center Distance of Bottom Cover Plate : 482 mm
❷ Gas Hole / Air inlet / Air Fitting
Gas Hole / Air inlet : G1/2
❸ Cover Plate
Top Cover Plate Diameter: 517 mm
Bottom Cover Plate Diameter:517 mm
❹Rubber Bellows
Rubber Bellows MAXl Diameter : 569mm
Rubber Bellows Natural Height :440 mm
❺ Bumper block / Buffer block
Without Bumper Block
❻ Girdle Hoop / Girdle Ring
Without Girdle Hoop
ContiTECH FS 1710-12 RS UNF, bellows type industrial air spring, single-turn, effective area 1710cm square, maximum stroke 12cm, stud bolt installation, inch seal ring
Manufacturer: Mainland
Maximum inflation pressure
120 psi
series
RS
Bellows type
Single convolution
weight
19.2 pounds
Style 126 Two Ply Bellows
Style 126
Ribbed neck aluminum bead rings (equal spacing), 17/8 bolts, nuts, washers
Firestone W01-358-7727
Two Ply Bellows
Rolled Plate Assembly*, 1/2 blind nuts, 3/4 NPT
Firestone W01-358-7726
Rubber bellows only
Firestone W01-358-1026
The Composition Of Industrial Convoluted Air Spring Element Has The Following Aspects
❶Nut / Blind Nut – As well a permanent part of the Cover Plate assembly. Provides an alternative to bolt installation system. It is inside defect within the iron plate
❷ Gas Hole / Air inlet / Air Fitting – Most usually 1/4 N.P.T. which provides the air entrance to the rubber bellows.
❸ Cover Plate - Curled up to more durable bellows design and the largest quality control in the factory. Allows 100% of the leak test before shipment.
❹Rubber Bellows - Air Bellows includes four layers of materials: an inner layer, two layer cord - reinforced fabrics, and a cover. Construction of a natural rubber provides – 65F functional properties.
❺ Bumper block / Buffer block - Solid rubber or engineering plastic device designed to prevent major damage to the vehicle or suspension in the event of a sudden loss of air pressure in the spring.
❻ Girdle Hoop / Girdle Ring - Molded wire-wound ring to provide lateral stability of the complex type spring bellows.
GUOMAT Air Springs can last at least twice lifetime, always as much as four times longer than steel springs!
- They almost do not need to maintain.
- Increase the service life of tires and brake pads.
- Let you pull anything; Eliminate expensive admission cost.
- Greatly reduce the breakage of the other vehicle components and maintenance.
- Back to you in the scrappage, truck and trailer with air suspension is more valuable.
- Allow the perfect load balancing between axles; Allow you to run in one of the largest legal restrictions.
- Reduce the discomfort and driver fatigue risk; Improve the efficiency of the driver's safety, and loyalty
- To provide smooth to load, reduce the cost of expensive insurance claims and packaging.
Product Tags:
|
|
FS 1710-12 RS Industrial Air Shocks Firestone W01-358-7727 For Continental Industry Equipment Images
|
